Home | News › 7 reasons to consider vibration technology for installing monopiles for Offshore Wind Farms
7 reasons to consider vibration technology for installing monopiles for Offshore Wind Farms1.
It shortens pile driving times. Tests show that under suitable soil conditions the vibratory hammer drives down the pile 10 times faster.* Complete the foundation work within short weather windows 2.
It brings down installation cost by deploying fewer and more economical tools. The vibro, when fitted with an upending module, can lift a pile from its horizontal storage position, upend, and lift the pile into driving position. The pile is driven into the seabed without the use of a pile gripper or positioning frame. Verticality is maintained with sensors mounted on the vibratory hammer3.
Vibrating reduces pile fatigue and doubles design life to 50 years by introducing less energy into the pile during driving.* It would also allow for mono pile designs with thinner wall thickness, leading to significant material savings and handling cost.4.
Limit piling noise to improve working conditions on the Installation Vessel for the construction team.5.
Changing pile designs and increasing pile diameters call for modular equipment such as a GIANT vibro that can be easily reconfigured to drive piles from 3.5-8.4 meter in diameter.6.
The GIANT innovation is built up from time tested and mature components like the 500M, but in a novel set-up that reduces the complexity of synchronization, and the weight and height of the hammer, while increasing the structural rigidity and the dynamic range of pile diameter the hammer can handle.7.
Independent test results show end bearing and lateral bearing capacity of vibrated piles is within specification.
*Compared to impact driving